How to Choose LAMZU Skates by Mousepad and DPI
By Official LAMZU Gaming Gear | Wireless Gaming Mouse ... | Published: 2026-10-16
Category: How-to Guides
Match LAMZU skate material and thickness to your mousepad and DPI so your aim stays consistent. A practical guide to choosing PTFE or glass skates.
Quick answer
Start with your mousepad surface, then adjust for your DPI. Cloth pads pair best with PTFE skates because they keep friction predictable and avoid the grabby feel glass can develop on fabric. Glass pads suit glass skates when you want minimum friction and fast micro-adjustments. Use lower DPI with glass and higher DPI with cloth to keep the same perceived speed. If you already own a LAMZU mouse, match the skate model to your exact mouse shape before buying.
Why mousepad surface comes before DPI
Your mousepad sets the friction baseline; skates only fine-tune it. A cloth pad has a woven texture that grips PTFE slightly, which gives you stopping power and control. A glass or hard pad has almost no texture, so skates that are too slick can make your cursor feel like it's floating. If you pick skates first and pad second, you'll fight inconsistent glide no matter how you set DPI. Decide the pad, then choose the skate material and thickness that complement it.
How DPI changes the skate you want
DPI is your mouse's sensitivity; skates determine how much physical effort it takes to move that sensitivity across the pad. At low DPI you move your arm more, so lower friction (glass skates) reduces fatigue but demands finer stopping control. At high DPI small hand movements cover more screen distance, so a bit more friction (PTFE) helps you avoid overshooting. There is no universal DPI number, but the principle holds: slicker skates reward low DPI, grippier skates stabilize high DPI.
PTFE vs glass: what changes in practice
PTFE skates are the standard for cloth pads. They wear in over a few days, feel consistent, and are inexpensive to replace. Glass skates are harder and slicker; they shine on glass pads and hard surfaces but can feel scratchy or overly fast on coarse cloth. Neither is better in every case. If you switch between pad types, PTFE is the safer default because it adapts to more surfaces. If you compete on a glass pad and want the lowest possible friction, glass skates are the logical match.
Thickness and mouse fit
Skate thickness affects how your mouse sits and how much of the sensor height is preserved. Thicker skates can lift the mouse slightly, which changes the distance between sensor and pad and can affect tracking on some surfaces. Always match the skate model to your exact mouse; a set made for a different shape won't sit flush. LAMZU sells skates tailored to specific models, so check compatibility before ordering. If a product listing doesn't state thickness, treat that as a decision limitation and prioritize the material and compatibility instead.
Step-by-step: choose your LAMZU skates
- Identify your mousepad surface: Check whether you use cloth, glass, or a hybrid hard pad. Cloth has visible weave and slight texture; glass is smooth and cool to the touch. This single fact decides whether you start with PTFE or glass. Checkpoint: if you're unsure, cloth is the most common starting point and pairs with PTFE.
- Note your current DPI and in-game sensitivity: Write down the DPI you actually use. Low DPI (roughly under 800) means more arm movement, so slicker skates can help. High DPI (1600 and up) benefits from a bit more friction to prevent overshoot. Common mistake: copying a pro's DPI without matching their pad and skates.
- Pick the material that matches the pad: Choose PTFE for cloth pads and glass for glass or hard pads. If you alternate between pads, PTFE is the more flexible choice. Don't buy glass skates expecting them to feel controlled on a coarse cloth pad. Checkpoint: material first, brand second.
- Confirm your exact mouse model: Skates are shaped for specific mice. For example, LAMZU Paro PTFE Skates fit the Paro, Atlantis MINI PTFE Skates fit the Atlantis MINI, and Thorn Glass Skates fit the Thorn. A set for another shape won't sit flush. Common mistake: ordering a skate set for a similar-looking but different model.
- Decide on thickness only if the listing states it: If thickness is listed, compare it to your stock skates. Thicker feet can change sensor height and feel. If thickness isn't stated, don't guess; rely on material and compatibility, which are the factors you can verify. Checkpoint: unlisted specs are a limitation, not a feature.
- Install and test for one week before judging: PTFE skates need a short break-in period. Install them, then play or work normally for several days. If glide still feels wrong, revisit your DPI or pad before buying another set. Next step: adjust DPI by 100–200 to fine-tune the feel rather than swapping skates immediately.
LAMZU skate options that fit this decision
- LAMZU Paro Mouse PTFE Skates: LAMZU Paro Mouse PTFE Skates are replacement feet made from PTFE, compatible with LAMZU Paro mice, and available in White. A direct-fit PTFE option for Paro owners who want predictable glide on cloth pads without changing mouse shape.
- LAMZU Atlantis MINI Mouse PTFE Skates (Small): LAMZU Atlantis MINI Mouse PTFE Skates (Small) are a small-size PTFE set in translucent white, compatible with the LAMZU Atlantis MINI. The small size suits the Atlantis MINI's footprint and keeps the low-friction PTFE feel on cloth surfaces.
- LAMZU Thorn Mouse Glass Skates: LAMZU Thorn Mouse Glass Skates are replacement glass feet for LAMZU Thorn mice, available in Black. A glass option for Thorn users who want minimum friction, typically paired with a glass or hard mousepad.
